Open Class Endurance Race

Name: Open Class Endurance Race
Start: 2026-05-23T02:00:00-05:00
Location: Scale Auto Racing

Schedule

Sat, 23 May, 2026 at 02:00 am

UTC-05:00

Location

Scale Auto Racing | Jersey Village, TX

🏎️ 1/32 ENDURANCE CHALLENGE 🏎️
Hosted by: Scale Auto Racing LLC
Home of Houston Slot Auto Racing Club
Sponsored by: Triple T Racing - Smith Motor Sports
🛠️ VEHICLE SPECIFICATIONS
Scale realism is mandatory. Only the most authentic builds take the grid.
Body: Must be Hard-shell plastic or resin (No Lexan/vacuum-formed).
Interior: Mandatory Full 3D interior (Dashboard, seats, and steering wheel). No flat "card stock" or Lexan trays.
Aero: Original wings (Group C, GT3, F1) must remain attached.
Penalty: If a wing falls off, a "quick fix" (tape/glue) is required between heats.
Excluded: No "Wing Cars" or "Euro-sport" style chassis.
⚙️ PERFORMANCE & TECH LIMITS
Magnetic Downforce: Max 150g (Measured via Magnet Marshall).
Motor: Original "out of the box" motors only (Max 23,000 RPM).
Changes to the gear ratio is allowed.
Use of hollow axles are allowed.
Adjustments to front ride height is ok.
Voltage: Track regulated to a steady 10.5 Volts.
Tires: Rubber or Urethane only (Slot.it, BRM, Paul Gage). Tires must stay within the rear wheel well.
STRICTLY PROHIBITED: No foam, no tire glue, and no liquid traction additives (Tiger Milk, Zip Grip, etc.).
🏁 RACE FORMAT & SCORING
Distance: 20 Laps per lane (e.g., 80 Laps total on a 4-lane track).
Lane Rotation: Drivers must rotate through every lane.
The "Crash Penalty": To discourage reckless driving, any driver who deslots must wait for a Turn Marshal to replace the car.
🔍 PRE-RACE INSPECTION
All cars must pass tech before the green flag:
Scale Test: Verification of < 150g magnet pull.
Visual Check: Confirmation of full interior and wing presence.
Tire Wipe: A clean white cloth test to ensure no wet additives are present.
If you raced in the last event you must use a different car
"Drive clean, race hard, and keep it on the rails."