Layers & Impressions: Encaustic and Lithography in Action

Name: Layers & Impressions: Encaustic and Lithography in Action
Start: 2026-05-24T13:00:00-04:00
End: 2026-05-24T16:30:00-04:00
Location: 40 Cannon Street, Poughkeepsie, NY, United States, New York 12601

Schedule

Sun May 24 2026 at 01:00 pm to 04:30 pm

UTC-04:00

Location

40 Cannon Street, Poughkeepsie, NY, United States, New York 12601 | Poughkeepsie, NY

This short demo series introduces two distinct printmaking and painting techniques: lithography and encaustic.

In the first demonstration (1pm-2:30pm), Amy will share with you the worlds of lithography. Stone Lithography is the process of drawing on a prepared limestone block with a grease pencil (or brush), then using ink that adheres to the drawing to transfer that image to paper when run through a press. The drawings are made with a sharpened lithographic crayon on a prepared limestone block. The fine, even grain makes stone the perfect medium for highly detailed drawings. This texture allows the artist to produce a wide range of distinctly different tones. The stones are reused: after an edition is printed, the image is ground off and the stone is ready for a new drawing. Stone lithography was invented around 1796 in Germany) as an economical method for printing scripts. Based on the chemical principle that grease and water repel each other, it uses porous limestone to hold a drawn image, allowing for numerous high-quality reproductions.

Artist Amy Silberkleit will give a print demonstration, discussing lithography and how it differs from other printmaking techniques. She will demonstrate her technique drawing on a stone, then preparing it for printing. Using her portable press, she will print prepared stones on a variety of papers, providing explanations as she works. A stone will be available for visitors to draw on.
In the second demonstration (3-4:30) Regina Quinn will focus on encaustic, an ancient painting method. Encaustic painting originated in Ancient Greece as far back as the 5th century B.C., developed from the practical use of heated beeswax and resin to caulk and waterproof ship hulls. The technique, which means "to burn in" from the Greek enkaustikos, evolved into a decorative art form for painting murals, sculptures, and, most famously, the mummy portraits in Egypt.
Today it is still using heated beeswax mixed with resin and pigment. During the demo, we will look at how the wax is melted, applied in layers, and fused with heat to create richly textured and luminous surfaces.
Together, these two demos highlight very different approaches to mark-making and material—one rooted in printmaking chemistry and the other in sculptural, wax-based painting.