TouchDesigner, ESP32s and Sensors!

Schedule

Sun Nov 29 2026 at 02:00 pm to 05:00 pm

UTC-05:00
Location

NYCResistor | Brooklyn, NY

Advertisement
Wire a motion sensor to an ESP32 and stream the live data into TouchDesigner over OSC and MQTT. No Arduino experience needed!
About this Event

You'll wire a MPU6050 accelerator and gyroscope to an ESP32, flash a starter sketch, and watch the live numbers land in TouchDesigner in real time over OSC, MQTT, or HTTP.

Once the numbers are flowing, the creative side opens up. Tilt the board to spin a particle system, wave your hand scale geometry, or push the temperature reading into a color ramp. The MPU6050 reports seven values, three for acceleration, three for rotation, and one for temperature, and any of them can drive geometry, color, audio, or timing.

You leave with the code and the wiring guide, which is everything you need to rebuild it.


What you'll do:

- Wire an MPU6050 to an ESP32 on the I2C bus.

- Flash the template and join it to the network.

- Send live accelerometer, gyroscope, and temperature readings into TouchDesigner three ways: OSC, MQTT, and HTTP.

- Drive visuals with real motion through CHOPs.

- Toggle each protocol from the dashboard and watch the setting stick across a reboot.


What you will learn:

- How to setup a working ESP32 sensor node with the code.

- How to use the template repository and wiring guide.

- How to get data into TouchDesigner to control your visuals.


Who it's for:

TouchDesigner users who want physical input. The workshop assume no Arduino experience.

Requirements: Participants should bring a laptop with TouchDesigner and Arduino installed.


Instructor :Bio

Woody Poulard (aka GRNCH) is a Brooklyn-based artist/musician whose work focuses on generative audio-reactive visual installations and performances. He uses creative coding applications like TouchDesigner to generate real-time visuals, Blender for 3D design, and Ableton for music production. Trained in both audio and mechanical engineering, Woody also makes physical sculptures using digital fabrication techniques like 3D printing, laser cutting, and CNC routing. GRNCH’s visuals use elements of abstract, futuristic, and hypnotic scenery, often paired with his signature sound: dark, cinematic, suspenseful techno and broken beat.

No masks required

As with all NYC Resistor events, this class is 18+ and governed by our Code of Conduct. The Code of Conduct, as well as accessibility information, can be found at www.nycresistor.com/participate/.

Please note that refunds must be requested 24 hours in advance. If you have any questions, please email [email protected].

Advertisement

Where is it happening?

NYCResistor, 87 3rd Ave, Brooklyn, United States

Event Location & Nearby Stays:

Tickets

USD 55.20

Know what’s Happening Next — before everyone else does.
NYC Resistor
Host or PublisherNYC Resistor

Ask AI if this event suits you