Experience Kiln Forming | 2024

Experience Kiln Forming is perfect class for your first experience working with kiln formed glass. Participants are given the opportunity to work with our instructors to learn about the equipment, tools, and materials used to transform raw glass into a memorable experience. When you are working in the kiln forming studio, you are working with glass in its solid state to create and design your object. The assembled work is then put into an electric kiln where it will be fired over a 12 hour cycle to fuse the layers together.

In this 3-hour kiln forming glass workshop, each participant will demonstrate the basic techniques of kiln formed glass to make at least two individual items. You will work with our instructors to cut and layer sheet glass with glass frit and stringers to create a design for a unique 12"x6" dish or platter and a seasonal item. Each participant will be able to select between the two seasonal items offered. Items created will be ready for pick up five business days after made.

SiNaCa Studios uses and teaches with Bullseye Glass (90coe) exclusively in our kiln forming studio.

12" x 6" Dish or Platter

Pocket Bud Vase or 4 Cheese Markers

Sun Chime or 6 Stir Sticks

2 Garden Stakes or 6 Wine Charms

Suncatcher or Cheese Knife

Sugar Skull or 2 Coasters

2 Ornaments or 4 Napkin Rings

Please refer to the FAQ section of our website to see all measures that we are taking to keep our staff and participants safe. If you are a first-time participant, you can find a link to our Risk and Release form on the FAQ page. You are welcome to bring a completed form with you. We will also have blank forms available during class check-in. ALL participants are required to have a completed form on file.

Glass Blowing: When you are working in the hot shop, you are working with the glass in its molten state (2100F). The process begins by taking a pipe and gathering molten glass from the furnace and then forming and shaping it with tools and by blowing air into it. You will be given the opportunity to apply color, reheat and shape your creation.

Flame Working: When you are working in the flame working studio, you are working with colored and clear glass rods or tubes in front of an open, gas-fueled torch. You will be given the opportunity to melt the glass as well as use tools and gravity to shape your item. SiNaCa Studios teaches with two different types of glass in our flame working studio. One is a soft soda-lime based glass that is used primarily for our bead making classes. The other is a hard glass called borosilicate, sometimes referred to as pyrex. It requires a much hotter flame to work, but can be used to create more complex sculptural and blown work.

Kiln Forming | Fusing & Slumping Glass: When you are working in the kiln forming studio, you are working with the glass in its solid state. You will be given the opportunity to cut and layer sheet glass with glass frit and stringers to create your design. We will then put the assembled work into an electric kiln where it will be fired over a 12-hour cycle to fuse the layers together. SiNaCa Studios uses and teaches with Bullseye Glass (90coe) exclusively in our kiln forming studio.

Host or Publisher SiNaCa Studios - School of Glass and Gallery